Dry Cabinets XSDB series technical overview
Features
- Ext. dimensions (WHD)
- Int. dimensions (WHD)
- Effective capacity
- Weight
- Power consumption
- Number of shelves
- Sensor accuracy
- Temperature accuracy
Features with smart box
- Ext. dimensions (WHD)
- Int. dimensions (WHD)
- Effective capacity
- Weight
- Power consumption
- Number of shelves
- Sensor accuracy
- Temperature accuracy
Characteristics
Dryer:
RH drying to below 0.5% RH Regeneration: dynamic
Sensor:
Integrated sensor, accuracy
+/- 0.8% RH, 0.2 °C
Performance:
10 min recovery time after door opening to below 0.5% RH
Control:
PLC with limit value input through touchscreen display
Door and humidity alarm
Climate control:
Heating up to 60°C
Forced air circulation
Documentation:
Integrated data logger
Climate data recording
Free Totech Viewer
Instrument | Vaisala | |
Type of dew point sensor | 9 x Hygroclip HC2A-S | |
Accuracy of dew point sensor | ± 0.3° C at + 20° C (+ 68° F) | |
Location of sensors | Every corner + center | |
Ambient conditions | Humidity 50 ± 5% rH, 22° ± 2°C, Pressure 994 ± 20 hPa | |
Door openings | 2 door openings of 15 sec. |
See technical drawings pages for specific performance results
Find what you are looking for.
The MSL software has the option to integrate Pick by Light solutions,
which will allow visual indication of storage process locations during ‘store-in’ and ‘take out’.
Settings: | Menu language options | |
Nominal humidity value | ||
Nominal humidity alarm | ||
Delay humidity alarm | ||
Door alarm | ||
Sensor offset | ||
Password protection | ||
Manual regeneration | ||
Nominal temperature value* | ||
Temperature alarm* | ||
Delay temperature alarm* | ||
*In combination with optional heater | ||
Display: | 10″ Full HD Capacitive Multi-Touch Panel | |
Humidity setpoint, alarm limit and alarm delay | ||
Multi Level Access | ||
Fixed Time-And Manual Regeneration Possible | ||
Sensor Readout History | ||
Newest Totech User Interface |
Drying U-5000 Series
Dehumidifying performance | 120 g/h max | |
Minimal humidity | 0.1% RH | |
Dehumidifying Temperature | 10 – 60° C | |
Electric supply | 230 V / 50 Hz (120 V / 60 Hz optionally available) | |
Dimensions (LWH) | 487 x 487 x 150 mm | |
Weight: | 14 kg |
Rotronic Sensor

Based on the Airchip 3000 Technology, the HygroClip 2 probes can be used for control of temperature and humidity. The HygroClip 2 probes can be configured with the ROTRONIC HW4 software and share the following features:
- Measurement of relative humidity and temperature
- Data recording of up to 2000 relative humidity and temperature value pairs
- Programmable automatic sensor test with fail safe mode and sensor drift compensation